TERZ NITE-T1XS5-8103

SPHINX in Europe
SE
  • AT
  • BE
  • DK
  • FR
  • DE
  • IE
  • IT
  • NL
  • PL
  • ES
  • SE
  • CH
  • UK
Produktgrupper > Ethernet Switches > TERZ NITE-T1XS5-8103

TERZ NITE-T1XS5-8103

Unmanaged Industrial Ethernet Switches M12 IP65/67
Single Pair Ethernet

TERZ NITE-T1XS5-8103
8202_36141.png
8202_36142.png
  • EgenskaperEgenskaper
  • BeskrivningBeskrivning
  • Further InformationFurther Information
  • PDFPDF
  • 24 VDC Power Supply
  • IEEE 802.3bw (100Base-T1)
  • Ultra-compact, ruggedized design
  • 4x D-coded Master Ports
  • Temperature range -40 to +70°C
  • 1x D-coded T1|TX Auto-Detection
  • IP65/67 metal housing
  • Polarity protection

The NITE-T1XS5 is an ultra-compact SPE switch for installation directly in the field. By using contacts 1 and 3 of the standard D-coded connector, you can quickly and easily save costs and space in cabling. An unshielded twisted single-pair cable is sufficient for data transmission up to a length of 15m. Larger cable lengths and protection against EMC interference can be achieved with shielded cables. Port 1 supports the T1|TX Auto-Detection mode, where standard Ethernet and Single Pair Ethernet end devices can be connected, whether they are MASTER or SLAVE.


ProdGrafik

Specifications


General

    Switch:
    IEEE802.3 Store and Forward

    Port count (X-cod. + D-cod.)         4+1    
    MTBF (SN 29500, Mio. h) tbd



Power supply / electronics

    Nominal voltage (VDC):
    Vin 24

    Voltage range (VDC):
    9 bis 60

    Connect. type:
    Vin M12 A-cod. (Pin1,2+|Pin3,4-) | M4 screw (FE)

    Supply circuit:
    SELV DIN 60950 (circuit breaker 10 A)

    Inrush current limiter:
    No

    Input fuse:
    Yes, Interrupting rating 50 A @ 125 VAC/VDC

    Polarity protection:
    Yes

    PCB Conformal Coating:
    Yes

    Protection category:
    III

    Port count (X-cod. + D-cod.)     4+1
    Power consumption (W)
    Idle | full load
        1,7 | 2,1     
    Input current (mA)
    Idle | full load
    75 | 85
    Inrush current (A) tbd



Mechanical properties

    Housing material:
    Nickel-plated aluminium, stainless steel

    Mounting:
    M6 hole for wall mounting, round head screw

    IP Protection class (operation):
    IP65/67

    Port count (M12)      4+1
    Width (mm) 65
    Height (mm) 1352
    Depth (mm)     29,8     
    Weight (g) 370



Ethernet interface 1 (T1|TX Auto-Detection)

    IEEE Standards:
    802.3 100BaseT(X) & 802.3bw 100Base-T1

    Connection type:
    M12 D-coded

    Port count | Speed:
    1 | 10/100 Mbit/s TX & 100 Mbit/s T1

    Cable length:
    TX 100 m (Twisted Pair, 0,14 mm² - 0,22 mm², Cat 5)
    T1 15+ m (Twisted Pair)



Ethernet interface 2

    IEEE Standards:
    IEEE 802.3bw 100Base-T1

    Connection type:
    M12 D-coded

    Port count | Speed:
    4 | 100 Mbit/s

    Pin assignment:
    TRX+ = PIN 1; TRX- = PIN 3

    T1 Port Mode:
    Master

    Cable length:
    15 m (Twisted Pair)



EMC and environmental specifications

    Operating temperature:
    -40°C to +70°C

    Storage temperature:
    -40°C to +85°C

    Relative humidity (operation):
    0%-95% (not condensing)

    Relative humidity (storage):
    0%-95% (not condensing)

    Atmospheric pressure (operation):
    2,000 m (795 hPa)

    EMC immunity:
    DIN EN-50121-3-2, 61000-6-2

    EMC radiated emission:
    DIN EN-50121-3-2, 61000-6-4

    Mechanical stability:
    DIN EN 61373



Approvals and certifications

    CE, E-Mark - (E1/R10)



Status and diagnostic indicators

    LED:
    Power | Link/Activity per Port





Ordering Information


Article     Art.-No.     Specification
NITE-T1XS5-8103      4814003 4x T1 Master, 1x TX|T1 auto     


Kunder som tittade på denna vara tittade också på
Accept all Reject Configure

This website uses cookies to provide the best possible experience. More information.