Moxa EDR-8010 Series
8 FE copper and 2 GbE SFP multiport industrial secure routers
- 8 FE + 2 Gigabit port all-in-one firewall/NAT/VPN/router/switch
- Visualize OT security with the MXsecurity management software
- Secure remote access tunnel with VPN
- Examine industrial protocol data with Deep Packet Inspection (DPI) technology
- Easy network setup with Network Address Translation (NAT)
- RSTP/Turbo Ring redundant protocol enhances network redundancy
- Security features based on IEC 62443/NERC CIP
- Supports secure boot for checking system integrity
- -40 to 75°C operating temperature range (-T model)
The EDR-8010 Series is a set of highly integrated industrial multi-port secure routers with firewall/NAT/VPN and managed Layer 2 switch functions. These devices are designed for Ethernet-based security applications in critical remote control or monitoring networks. These secure routers provide an electronic security perimeter to protect critical cyber assets including substations in power applications, pump-and-treat systems in water stations, distributed control systems in oil and gas applications, and PLC/SCADA systems in factory automation.
Defend Against Malicious Threats With Advanced Cybersecurity Features
The EDR-8010 Series' embedded firewall uses policy rules to control network traffic between trusted zones while Network Address Translation (NAT) shields the internal network from unauthorized access by outside hosts. The Virtual Private Networking (VPN) functionality further provides users with secure communication tunnels when accessing the private network from the public Internet. To help protect your OT assets from cyberattacks, the EDR-8010 Series supports Deep Packet Inspection (DPI) to examine the data portion of network packets for various OT-specific protocols.
Simplify Configurations With the User-friendly Interface and Quick Settings
The EDR-8010 Series' Setup Wizard provides an easy way for users to set up WAN, LAN, and Bridge ports for routing functionality in just four steps. In addition, the object-based firewall management feature gives engineers a simple way to configure and maintain firewall filtering for IP addresses and subnets, network services, industrial application services, and user-defined services.
Industrial-grade Design to Ensure Uninterrupted Network Connectivity
The EDR-8010 Series' rugged hardware makes these secure routers ideal for harsh industrial environments, featuring wide-temperature models that are built to operate reliably in hazardous conditions and extreme temperatures of -40 up to 75°C. Moreover, the EDR-8010 Series supports comprehensive Layer 2 and Layer 3 redundancy mechanisms to ensure that your network stays connected at all times.
Specifications
- Input/Output Interface
- Alarm Contact Channels
Resistive load: 1 A @ 24 VDC
Buttons
Reset button
Digital Input Channels
+13 to +30 V for state 1
-30 to +3 V for state 0
Max. input current: 8 mA
Ethernet Interface
- 10/100BaseT(X) Ports (RJ45 connector)
8
1000BaseSFP Slots
2
Standards
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X)
IEEE 802.3z for 1000BaseSX/LX/LHX/ZX
IEEE 802.3x for flow control
IEEE 802.1Q for VLAN Tagging
IEEE 802.1X for authentication
Static Port Trunk
Ethernet Software Features
- Broadcast Forwarding
IP directed broadcast, broadcast forwarding
Management
Back Pressure Flow Control
DDNS
DHCP Server/Client
Web Console (HTTP/HTTPS)
LLDP
QoS/CoS/ToS
SNMPv1/v2c/v3
Telnet
TFTP
HTTPS
SSH
Redundancy Protocols
RSTP
STP
Turbo Ring v2
Routing
Throughput: 50K packets per second (max. 500 Mbps)
Routing Table
Max. 4K routing rules
Concurrent Connections
Max. 120K
Connections Per Second
Max. 6K
Routing Redundancy
VRRP
Security
Secure Boot
IPsec
L2TP (server)
RADIUS
Trust access control
Time Management
NTP Server/Client
SNTP
Unicast Routing
OSPF
RIPV1/V2
Static Route
Multicast Routing
Static Route
Filter
IGMP v1/v2/v3
Switch Properties
- VLAN ID Range
VID 1 to 4094
IGMP Groups
256
Max. No. of VLANs
16
LED Interface
- LED Indicators
PWR1, PWR2, STATE, MSTR/H.TC, CPLR/T.TC, VRRP/HA, VPN, USB
DoS and DDoS Protection
- Technology
ARP-Flood FIN Scan
ICMP-Death NEWWithout-SYN Scan
NMAP-ID Scan
NMAP-Xmas Scan
Null Scan
SYN/FIN Scan
SYN/RST Scan
SYN-Flood
Xmas Scan
Firewall
- Filter
DDoS
Ethernet protocols
ICMP
IP address
MAC address
Ports
Stateful Inspection
Router firewall
Transparent (bridge) firewall
Deep Packet Inspection
Modbus TCP
Modbus UDP
DNP3
IEC 60870-5-104
IEC 61850 MMS
Additional protocols will be supported through future firmware updates.
Throughput
Max. 50K packets per second (max. 500 Mbps)
IPsec VPN
- Authentication
MD5 and SHA (SHA-256)
RSA (key size: 1024-bit, 2048-bit)
X.509 v3 certificate
Concurrent VPN Tunnels
Max. 50 IPsec VPN tunnels
Encryption
DES
3DES
AES-128
AES-192
AES-256
Protocols
IPsec
L2TP (server)
PPTP (client)
Throughput
Max. 200 Mbps (Conditions: AES-256, SHA-256)
NAT
- Features
1-to-1
N-to-1
Port forwarding
NAT loopback
Real-Time Firewall / VPN Event Log
- Event Type
Firewall event
VPN event
Media
Local storage
SNMP Trap
Syslog server
Serial Interface
- Console Port
RS-232 (TxD, RxD, GND), 3-pin (115200, n, 8, 1)
Connector
USB Type-C
Power Parameters
- Connection
Removable terminal block
Operating Voltage
9.6 to 60 VDC
Input Voltage
12/24/48 VDC
Input Current
0.53 A @ 12 VDC
0.26 A @ 24 VDC
0.14 A @ 48 VDC
Reverse Polarity Protection
Supported
Physical Characteristics
- Housing
Metal
Dimensions
45 x 135 x 105 mm (1.77 x 5.31 x 4.13 in)
Weight
520 g (1.15 lb)
Installation
DIN-rail mounting (DNV-certified)
Wall mounting (with optional kit)
Environmental Limits
- Operating Temperature
Standard Models: -10 to 60°C (14 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
All Models: DNV-certified for -25 to 70°C (-13 to 158°F)
Storage Temperature (package included)
-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity
5 to 95% (non-condensing)
Standards and Certifications
- Safety
IEC 62368-1
UL 62368-1
EMC
EN 55032/35
EMI
CISPR 32, FCC Part 15B Class A
EMS
IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m
IEC 61000-4-4 EFT: Power: 4 kV; Signal: 4 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 4 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8 PFMF
Railway
EN 50121-4
Traffic Control
NEMA TS2
Maritime
IEC 60945
DNV
Shock
IEC 60068-2-27
Freefall
IEC 60068-2-32
Vibration
IEC 60068-2-6
MTBF
- Time
1,347,225 hrs
Standards
Telcordia (Bellcore), GB
Package Contents
- Device
1 x EDR-8010 Series secure router
Cable
1 x DB9 female to USB Type-C
Installation Kit
4 x cap, plastic, for RJ45 port
2 x cap, plastic, for SFP slot
Documentation
1 x quick installation guide
1 x warranty card
Note
SFP modules need to be purchased separately for use with this product.
Ordering Information
Model Name | 10/100 BaseT(X) Ports (RJ45 Connector) |
1000 Base BaseSFP Slots |
Firewall | NAT | VPN | Input Voltage | Conformal Coating |
Operating Temp. |
---|---|---|---|---|---|---|---|---|
EDR-8010-2GSFP | 8 | 8 | ✓ | ✓ | - | 12/24/48 VDC | - | -10 to 60°C |
EDR-8010-2GSFP-T | 8 | 8 | ✓ | ✓ | - | 12/24/48 VDC | - | -40 to 75°C |
EDR-8010-2GSFP-CT | 8 | 8 | ✓ | ✓ | - | 12/24/48 VDC | ✓ | -10 to 60°C |
EDR-8010-2GSFP-CT-T | 8 | 8 | ✓ | ✓ | - | 12/24/48 VDC | ✓ | -40 to 75°C |
EDR-8010-VPN-2GSFP | 8 | 8 | ✓ | ✓ | ✓ | 12/24/48 VDC | - | -10 to 60°C |
EDR-8010-VPN-2GSFP-T | 8 | 8 | ✓ | ✓ | ✓ | 12/24/48 VDC | - | -40 to 75°C |
EDR-8010-VPN-2GSFP-CT | 8 | 8 | ✓ | ✓ | ✓ | 12/24/48 VDC | ✓ | -10 to 60°C |
EDR-8010-VPN-2GSFP-CT-T | 8 | 8 | ✓ | ✓ | ✓ | 12/24/48 VDC | ✓ | -40 to 75°C |
Accessories (sold separately)
Storage Kits | |
---|---|
ABC-02-USB | Configuration backup and restoration tool, firmware upgrade, and log file storage tool for managed Ethernet switches and routers, 0 to 60°C operating temperature |
ABC-02-USB-T | Configuration backup and restoration tool, firmware upgrade, and log file storage tool for managed Ethernet switches and routers, -40 to 75°C operating temperature |
SFP Modules | |
SFP-1G10ALC | WDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 10 km transmission; TX 1310 nm, RX 1550 nm, 0 to 60°C operating temperature |
SFP-1G10ALC-T | WDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 10 km transmission; TX 1310 nm, RX 1550 nm, -40 to 85°C operating temperature |
SFP-1G10BLC | WDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 10 km transmission; TX 1550 nm, RX 1310 nm, 0 to 60°C operating temperature |
SFP-1G10BLC-T | WDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 10 km transmission; TX 1550 nm, RX 1310 nm, -40 to 85°C operating temperature |
SFP-1G20ALC | WDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 20 km transmission; TX 1310 nm, RX 1550 nm, 0 to 60°C operating temperature |
SFP-1G20ALC-T | WDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 20 km transmission; TX 1310 nm, RX 1550 nm, -40 to 85°C operating temperature |
SFP-1G20BLC | WDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 20 km transmission; TX 1550 nm, RX 1310 nm, 0 to 60°C operating temperature |
SFP-1G20BLC-T | WDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 20 km transmission; TX 1550 nm, RX 1310 nm, -40 to 85°C operating temperature |
SFP-1G40ALC | WDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 40 km transmission; TX 1310 nm, RX 1550 nm, 0 to 60°C operating temperature |
SFP-1G40ALC-T | WDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 40 km transmission; TX 1310 nm, RX 1550 nm, -40 to 85°C operating temperature |
SFP-1G40BLC | WDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 40 km transmission; TX 1550 nm, RX 1310 nm, 0 to 60°C operating temperature |
SFP-1G40BLC-T | WDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 40 km transmission; TX 1550 nm, RX 1310 nm, -40 to 85°C operating temperature |
SFP-1GEZXLC | SFP module with 1 1000BaseEZX port with LC connector for 110 km transmission, 0 to 60°C operating temperature |
SFP-1GEZXLC-120 | SFP module with 1 1000BaseEZX port with LC connector for 120 km transmission, 0 to 60°C operating temperature |
SFP-1GLHLC | SFP module with 1 1000BaseLH port with LC connector for 30 km transmission, 0 to 60°C operating temperature |
SFP-1GLHLC-T | SFP module with 1 1000BaseLH port with LC connector for 30 km transmission, -40 to 85°C operating temperature |
SFP-1GLHXLC | SFP module with 1 1000BaseLHX port with LC connector for 40 km transmission, 0 to 60°C operating temperature |
SFP-1GLHXLC-T | SFP module with 1 1000BaseLHX port with LC connector for 40 km transmission, -40 to 85°C operating temperature |
SFP-1GLSXLC | SFP module with 1 1000BaseLSX port with LC connector for 1km/2km transmission, 0 to 60°C operating temperature |
SFP-1GLSXLC-T | SFP module with 1 1000BaseLSX port with LC connector for 1km/2km transmission, -40 to 85°C operating temperature |
SFP-1GLXLC | SFP module with 1 1000BaseLX port with LC connector for 10 km transmission, 0 to 60°C operating temperature |
SFP-1GLXLC-T | SFP module with 1 1000BaseLX port with LC connector for 10 km transmission, -40 to 85°C operating temperature |
SFP-1GSXLC | SFP module with 1 1000BaseSX port with LC connector for 300m/550m transmission, 0 to 60°C operating temperature |
SFP-1GSXLC-T | SFP module with 1 1000BaseSX port with LC connector for 300m/550m transmission, -40 to 85°C operating temperature |
SFP-1GZXLC | SFP module with 1 1000BaseZX port with LC connector for 80 km transmission, 0 to 60°C operating temperature |
SFP-1GZXLC-T | SFP module with 1 1000BaseZX port with LC connector for 80 km transmission, -40 to 85°C operating temperature |
SFP-1GTXRJ45-T | SFP module with 1 1000BaseT port with RJ45 connector for 100 m transmission, -40 to 75°C operating temperature |
Mounting Kits | |
WK-35-01 | Wall-mounting kit with 2 plates (35 x 44 x 2.5 mm) and 6 screws |
Software | |
LIC-MXsecurity-NEW-1Y-XN-SR | 1-year MXsecurity license with customizable node quantity (minimum 1 node) |
LIC-MXsecurity-NEW-XM-XN-DMR | MXsecurity license with customizable duration and node quantity (minimum 1 month, minimum 1 node) |
LIC-MXsecurity-RENEW-1Y-XN-SR | 1-year MXsecurity renewal license with customizable node quantity (minimum 1 node) |
LIC-MXsecurity-RENEW-XM-XN-DMR | MXsecurity renewal license with customizable duration and node quantity (minimum 1 month, minimum 1 node) |
LIC-MXsecurity-ADD-1Q-XN-SR | 3-month MXsecurity add-on license with customizable node quantity (minimum 1 node) |
LIC-MXsecurity-ADD-2Q-XN-SR | 6-month MXsecurity add-on license with customizable node quantity (minimum 1 node) |
LIC-MXsecurity-ADD-3Q-XN-SR | 9-month MXsecurity add-on license with customizable node quantity (minimum 1 node) |
LIC-MXsecurity-ADD-4Q-XN-SR | 1-year MXsecurity add-on license with customizable node quantity (minimum 1 node) |
LIC-MXsecurity-ADD-XM-XN-DMR | MXsecurity add-on license with customizable duration and node quantity (minimum 1 month, minimum 1 node) |
Kunder som tittade på denna vara tittade också på