Digi IX10 Cellular Router
Rugged, reliable, cost-effective connectivity for critical industrial applications
- Compact and economical connectivity solution with industrial feature set for public and private cellular networks
- Redundant connectivity with dual SIMs and Digi SureLink®
- Global and regional bands with single part number to simplify distribution, deployment and management
- Built-in Digi TrustFence® for device security, device identity and data privacy
- Digi Remote Manager® platform for easy setup, mass configuration and out-of-band management
- Ethernet port and single RJ-45 serial port (RS-232/485)
Digi IX10 is a full-featured cellular router built for trouble-free reliability over a long service life. Its flexible power and connectivity options make it a versatile and cost-effective choice for industrial, digital signage, ATMs, lottery terminals, kiosks and other unattended retail applications that need to provide secure transactions over public and private cellular networks.
Digi IX10 can operate on public and private LTE networks, with features to assist in network control and management, such as dual SIMs for failover connectivity, VLAN support, load balancing between cellular and Ethernet WANs, dual APNs and configurable APN search
Digi IX10 features one Ethernet port and one RJ-45 serial port supporting both RS-232 and RS-485.
Gain critical insights into your deployed devices and manage your network with Digi Remote Manager® (Digi RM)- the command center for your deployment. Digi RM is a cloud-based solution that facilitates easy setup, mass configuration, maintenance and support, even for thousands of devices. Digi RM empowers you to evaluate, update and configure your Digi products, while providing easy visibility into the health of your network. It also offers low-touch and no-touch provisioning.
In the event of an interruption to your primary network connection, Digi RM also provides secure out-of-band management of edge devices via Digi IX10's serial port and command-line interface.
Digi IX10 offers the convenience of a global SKU for simplified global distribution and deployment, as well as cost-optimized SKUs for North America, including a CBRS-only SKU.
SPECIFICATIONS
- CELLULAR
- CERTIFICATIONS
Visit https://www.digi.com/resources/certifications for latest certifications
LTE CAT 4 GLOBAL (G4)
LTE Cat 4 Global: B1, B2, B3, B4, B5, B7, B8, B12, B13, B18, B19, B20, B25, B26, B28, B38, B39, B40, B41
3G: B1, B2, B4, B5, B6, B8, B19
2G EDGE / GPRS: 850 / 900 / 1800 / 1900 MHz
LTE CAT 4 REGIONAL - NORTH AMERICA (N4)
LTE Cat 4 Regional - North America: B2, B4, B5, B12, B13, B14, B66, B71
3G: B2, B4, B5
LTE-A CAT 6 CBRS-ONLY - NORTH AMERICA (C6)
LTE-Advanced Cat 6 CBRS-only - North America: B42, B43, B48 (CBRS)
SIM SLOTS
(2) Mini-SIM (2FF)
SIM SECURITY
Behind SIM cover, secured with screw (#1 Phillips)
SOFTWARE AND MANAGEMENT
- REMOTE MANAGEMENT
Digi Remote Manager®; SNMP v2/v3 (user installed/managed)
LOCAL MANAGEMENT
WebUI (HTTP/HTTPS); CLI (SSH)
MANAGEMENT / TROUBLESHOOTING TOOLS
FTP client, SCP; protocol analyzer with PCAP for Wireshark; event logging with syslog and SMTP client;
NTP/SNTP; Nagios, Intelliflow, iPerf, Dynamic DNS, ping, traceroute
MEMORY
256 MB RAM, 256 MB flash
ETHERNET
- PORTS
(1) RJ-45; 10/100 Mbps (auto-sensing)
SERIAL
- PORTS
(1) RJ-45 10-pin (10P10C); RS-232/485; software selectable
- RS-232 DTE (RXD, TXD, RTS, CTS, DTR, DCD, DSR, RI)
- RS-485 (TX/RX+; RX/TX-); half-duplex
PHYSICAL
- DIMENSIONS (L x W x H)
118 mm x 88 mm x 35 mm (4.65 in x 3.46 in x 1.38 in)
WEIGHT
0.39 kg (0.86 lb)
STATUS LEDs
Power, Internet, SIM 1, SIM 2, SIM fail, LTE, signal strength (5)
ENCLOSURE
Glass-filled polyphenylene sulphide (PPS) / IP30
POWER REQUIREMENTS
- POWER INPUT
9 - 30 VDC, 1.0 A maximum
POWER CONSUMPTION
Configurable low-power modes; 1.5 W (light traffic flow),
3.5 W (peak data transmission);
1.25 W (low power mode, idle traffic)
ACCESSORIES
- AVAILABLE ACCESSORIES
Accessories not included.
Available accessories: industrial extended temperature or commercial power supply (required),
and cellular antennas, DIN rail clip and EIA 422/485 to RJ-45 connector (recommended / optional)
ENVIRONMENTAL
- OPERATING TEMPERATURE
-40 °C to 70 °C (-40 °F to 158 °F);
device performance may be impacted above 50 °C (122 °F)
STORAGE TEMPERATURE
-40 °C to 85 °C (-40 °F to 85 °F)
RELATIVE HUMIDITY
5% to 95% (non-condensing)
APPROVALS
- CELLULAR
Visit https://www.digi.com/resources/certifications for latest cellular certifications
SAFETY
IEC62368-1, CB, EN62311
ENVIRONMENTAL
ROHS3
EMISSIONS / IMMUNITY
CE; RED; FCC Part 15, Subpart B; ICES-003; AU/NZS CISPR32
ENTERPRISE SOFTWARE | Description |
---|---|
PROTOCOL SUPPORT | HTTPS, FTP client, TLS v1.2, SCP (client and server), SFTP, SMTP client for use by scripts and the command line, SNMP (v2/v3), SSH; remote management via Digi Remote Manager®; protocol analyzer, ability to capture PCAP for use with Wireshark; DynDNS; dynamic DNS client compatible with BIND9/No-IP/DynDNS; captive portal, Intelliflow; Nagios, DNS server, NTP server, multicast, mDNS, IPerf |
SECURITY | IP filtering, stateful firewall, custom firewall rules (iptables), address and port translation, TLS 1.2 and above, OpenVPN client and server, VPN tunnels; Authentication: RADIUS, TACACS+; certificates; MAC address filtering; VLAN support |
VPN | IPSec with IKEv1, IKEv2, NAT Traversal; OpenVPN client and server; GRE VPN tunnels; Cryptology: SHA-1/256/384/512, MD5, RSA; Encryption: 3DES and AES up to 256-bit (CBC mode for IPsec); Diffie Hellman: DH groups 1-32 (CURVE448) |
ROUTING/FAILOVER | IP pass-through; NAT, NAPT with IP port forwarding; GRE; multicast routing; Routing protocols: RIP (v1, v2) OSPF, BGP; IP failover: VRRP; automatic failover, Digi SureLink® |
OTHER PROTOCOLS | DHCP; dynamic DNS client compatible with No-IP/DynDNS |
Kunder som tittade på denna vara tittade också på