DIGI IX30 Industrial Cellular Router
Intelligent 4G LTE router designed for critical infrastructure and industrial applications
- Global LTE and HSPA+ support and certification on major carrier networks around the world
- Ethernet, serial I/O and Modbus bridging
- Low-power feature can be easily configured for remote and off-grid applications
- Extremely resilient cellular connection through Digi's patented SureLink®, VRRP+ protocol and dual SIM slots
- Dedicated GNSS receiver supporting GPS, GLONASS, BeiDou and Galileo
- License-free enterprise software: VPN, firewall, logging and authentication
- Digi Remote Manager® platform for easy setup, mass configuration and management
- Rugged enclosure, optimized for DIN rail or shelf mounting
- C1D2 and ATEX rated; NEMA TS2 temperature rated
- Digi WAN Bonding for 5G/LTE WAN aggregation and immediate failover
Digi IX30 is an intelligent 4G LTE router designed for optimal performance and reliability across a wide range of critical infrastructure and industrial applications. This complete solution is fully integrated with software and security, providing a secure, reliable connection to industrial controllers, process automation equipment and smart grid assets on third party sites or remote locations.
Gain critical insights into your deployed devices and manage your network with Digi Remote Manager (Digi RM) - the command center for your deployment. Digi RM is a cloud-based solution that facilitates easy setup, mass configuration, maintenance and visibility into the health of your network, whether you deploy dozens or thousands of devices.
In the event of an interruption to your primary network connection, Digi RM also provides secure terminal access for out-of-band management of edge devices via serial port and command-line interface.
Software-defined, multi-carrier networking and global LTE and HSPA+ options make it easy to get connected. This drop-in connectivity gives operators a way to reduce downtime and service calls, and also increase revenue by bringing distributed sites online faster. With its hardened components and low-power feature, it can be configured and installed anywhere - in the harshest conditions, and in applications where power is limited or unavailable.
The Digi IX30 router also offers a FirstNet Capable™ LTE-Advanced model designed to meet the critical demands for emergency communications. Additional industrial use case applications include building and process automation controllers, IP cameras and access controllers, remote data loggers, flow meters, sensing equipment, telco infrastructure, and traffic and obstruction lighting.
SPECIFICATIONS
- WIRELESS INTERFACES
- CELLULAR
- CERTIFICATIONS
Visit https://www.digi.com/resources/certifications for latest certifications
FIRSTNET CAPABLE™ LTE-ADVANCED CAT 7
LTE-Advanced Cat 7 - FDD: B2, B4, B5, B7, B12, B13, B14 FirstNet®, B25, B26, B66, B71; TDD: B41, B42, B43, B48;
WCDMA: B2, B4, B5;
GNSS: GPS, GLONASS, BeiDou, Galileo, QZSS
LTE CAT 4 GLOBAL (SELECT REGIONS/CARRIERS*)
LTE Cat 4 - FDD: B1, B2, B3, B4, B5, B7, B12, B13, B18, B19, B20, B25, B26, B28; TDD: B38, B39, B40, B41;
WCDMA: B1, B2, B4, B5, B6, B8, B19;
GSM: B2, B3, B5, B8;
GNSS: GPS, GLONASS, BeiDou, Galileo, QZSS
LTE CAT 4 AU/NZ
LTE Cat 4 - FDD: B1, B3, B5, B7, B8, B18, B19, B21, B28; TDD: B38, B39, B40, B41;
3G: B1, B5, B6, B8, B9, B19;
GNSS: GPS, GLONASS, BeiDou, Galileo, QZSS
CONNECTORS
(3) 50 Ω SMA (2x cellular, 1x GNSS); center pin: female
SIM SLOTS
(2) Mini-SIM (2FF)
SIM SECURITY
Screw-down SIM cover
GNSS
Protocol NMEA 0183 V3.0
Acquisition Time Hot Start 1 s; Warm Start 29 s; Cold Start 32 s
Accuracy Horizontal: < 2 m (50%), < 5 m (90%); Altitude: < 4 m (50%), < 8 m (90%); Velocity: < 0.2 m/s
SOFTWARE & MANAGEMENT
- REMOTE MANAGEMENT
Digi Remote Manager® (cloud based); SNMP v1/v2c/v3 (user installed/managed), SMS
LOCAL MANAGEMENT
WebUI (HTTP/HTTPS); CLI (Telnet, SSH, Serial)
MANAGEMENT/ TROUBLESHOOTING TOOLS
FTP, SFTP, SCP; protocol analyzer with PCAP for Wireshark; event logging with Syslog and SMTP; NTP/SNTP
WIRED INTERFACES
- ETHERNET
- PORTS
(2) RJ-45; 10/100 Mbps (auto-sensing)
SERIAL
- PORTS
(1) DB-9; DCE
STANDARD
RS-232/422/485
SIGNAL SUPPORT
TXD, RXD, RTS, CTS, DTR, DCD, DSR, RI
FLOW CONTROL
Software (XON/XOFF), hardware supported
I/O
- CONNECTOR
12-pin screw down terminal block
DIGITAL
0-30 VDC, 200 mA max.; (4) I/O, software-selectable; pulse counter input
ANALOG
(4) analog I/O; 4-20 mA or 0-10 V, software-selectable; 12-bit resolution
USB
- PORTS
(1) USB 2.0 Type A; 5 V 500 mA max
PHYSICAL
- DIMENSIONS (L X W X H)
12.8 cm x 10 cm x 5.2 cm (5.04 in x 3.94 in x 2.05 in)
WEIGHT
0.5 kg (1.1 lb)
STATUS LEDS
Signal Strength (5), LTE, Power
ENCLOSURE/RATING
Aluminum / IP30
MOUNTING
DIN rail mount
POWER REQUIREMENTS
- POWER INPUT
9 - 30 VDC, 18 W min power source required
POWER CONNECTOR
Screw down removable terminal block
POWER CONSUMPTION
1.5 W (light traffic flow), 3.5 W (peak data transmission);
1 W (low power mode, idle traffic, no serial/no Ethernet WAN)
ENVIRONMENTAL
- HAZARDOUS (CLASS 1 DIV 2)
Yes
OPERATING TEMPERATURE
-34 °C to 74 °C (-29 °F to 165 °F);
reduced cellular performance may occur above 60 °C (140 °F)
STORAGE TEMPERATURE
-40 °C to 85 °C (-40 °F to 185 °F)
ETHERNET ISOLATION
1.5 kV RMS
SERIAL PORT PROTECTION (ESD)
15 kV
RELATIVE HUMIDITY
5% to 95% (non-condensing)
APPROVALS
- CELLULAR
IX30-00P7: PTCRB, Verizon, T-Mobile, AT&T, FirstNet Capable™; IX30-00G4: CE, RED, UKCA;
visit https://www.digi.com/resources/certifications for latest cellular certifications
SAFETY
Hazardous locations: ANSI/ISA-12.12.01-2015, CAN/CSA C22.2 NO.213-15;
Ordinary locations: UL 62368-1, 2nd Edition, 2014-10-14; UL 62368: 2014, 2nd Edition;
ATEX standards: Protection method II 3 G Ex nA IIC T4 Gc;
EN 60079-0:2012+A11:2013, EN 60079-15:2010, DEMKO 15 ATEX 1574X Rev. 1
IECEX STANDARDS
US/UL/ExTR17.0077/00
EMISSIONS/IMMUNITY
CE, RED, FCC Part 15 Class B, ICES-003, AS/NZS CISPR 32
ENVIRONMENTAL
RoHS3
Kunder som tittade på denna vara tittade också på