MOXA HDR Power Supply Series

The HDR-60-24 Power Supply Series has been specifically designed for industrial applications. The small form factor makes it ideal for installation in limited spaces, and the devices have been built to operate between -30 to 70°C. The devices support AC input ranges from 85 to 264 VAC and conform to the EN 61000-3-2 standard, which the European Union uses to regulate harmonic current. Furthermore, the devices are equipped with constant current mode for overload protection.

SPECIFICATION

Output Power Parameters


Wattage
60 W

Voltage
24 VDC

Current Rating
0 to 2.5 A

Ripple and Noise
150 mVp-p

Voltage Adjustment Range
21.6 to 29 VDC

Setup/Rise Time at Full Load
500 ms, 50 ms at 230 VAC
500 ms, 50 ms at 115 VAC

Typical Hold Up Time at Full Load
30 ms at 230 VAC
12 ms at 115 VAC



Input Power Parameters


Voltage Range
85 to 264 VAC (47 to 63 Hz)
120 to 370 VDC

Typical Efficiency
90%

Typical Current
0.8 A @ 230 VAC, 1.2 A @ 115 VAC

Inrush Current (cold start)
60 A @ 230 VAC, 30 A @ 115 VAC



Overload Protection


Rated Output Power
105 to 160%

Protection Type
Constant current limiting, recovers automatically after fault condition is removed



Overvoltage Protection


Over-Voltage Range
30 to 36 V

Protection Type
Shut down operating voltage, repower on to recover



Standards and Certifications


Safety
UL 508, EN 62368-1, UL 62368-1, IEC 62368-1

EMC
EN 55032/24, EN 61000-3-2 Class A, EN 61000-3-3

EMS
IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 6000 MHz: 10 V/m
IEC 61000-4-4 EFT: Power: 2 kV
IEC 61000-4-5 Surge: Power: 2 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8 PFMF
IEC 61000-4-11 DIPs



Physical Characteristics


Dimensions
52.5 x 90 x 54.5 mm (2.07 x 3.54 x 2.15 in)

Weight
230 g (0.5 lb)



Environmental Limits


Operating Temperature
-30 to 70°C (-22 to 158°F)

Storage Temperature
-40 to 85°C (-40 to 167°F)

Max. Operating Temperature at Full Load
45°C (113°F)

Ambient Relative Humidity
20 to 90% (non-condensing)



MTBF


Time
927,560 hrs

Standards
MIL-HDBK-217F