TERZ SPARK-XS Serie

The SPARK-XS PoE switches enable the supply of up to 6 devices with power and data. By reducing the connection to just one cable and saving additional power supplies, the cost, installation effort and space requirements can be reduced. The switches operate according to the IEEE standard 802.3at Type 1 as Power Sourcing Equipment (PSE) and supply the connected devices with up to 15.4 watts per port. The retrofitting of existing applications where space is exhausted in the control cabinet, is possible as well as the construction of new installations optimized with a focus on decentralization of the components.

SPECIFICATION

General


Switch:
IEEE802.3 Store and Forward; non-blocking wire speed

Auto-Negotiation, Auto-MDI-X, Auto-Polarity:
Yes

Frame size:
1,518 Bytes

MAC table size:
2,000 addresses

Quality of Service:
Yes

Energy Efficient Ethernet:
No

Flow Control:
No

PROFINET suitable:
Yes



Port count (X-cod. + D-cod.)	4+1
MTBF (SN 29500, Mio. h)	tbd





Frame Forwarding (Art.-No.)	xxxxx0
LLDP, PTCP Delay 01:80:C2:00:00:0E	Forwarding
RSTP BPDU 01:80:C2:00:00:00	Forwarding




Ethernet Interfaces


IEEE Standards:
802.3 10Base-T, 100Base-TX, 1000Base-T

Isolation:
2 kVDC X-codedD-coded PoE
1 kVDC X-codedhousing

Connection type:
RJ45

Port Count | Speed:
4 | 10/100 Mbit/s + 1 | 10/100/1000 Mbit/s

Cable length:
100 m (Twisted Pair, 0.14 mm² - 0.22 mm², Cat 5)



Power supply / electronics


Nominal voltage:(VDC)
Vin 24

Voltage range:(VDC)
16,8 - 30 (14,4 for 100 ms)

Connection type:
Vin M12 A-cod. (Pin1+|Pin2-) | M4 screw (FE)

Supply circuit:
SELV DIN 60950 (circuit breaker 10 A)

Inrush current limiter:
No

Input fuse:
Yes, Interrupting rating 50 A @ 125 VAC / VDC

Polarity protection:
Yes

PCB Conformal Coating:
Yes

Protection category:
III

Isolation:
2 kVDC Vinhousing | 1,5 kVDC Vin ↔ X-coded
0 kVDC Vin ↔ D-coded PoE



Power over Ethernet


Type | Standard:
PSE | IEEE 802.3af/802.3at (Typ 1)

Mode:
A (Endspan); Pins V+ = 1,2 und V- = 3,6

Max. current per port (mA):
0,350

Max. power per port (W):
15.4

Max. total power budget PoE (W):
40

Galvanic isolation:
No

Switching live voltage path:
Yes

Isolation:
0 kVDC D-coded PoED-coded PoE
2,25 kVDC D-coded PoEhousing



Port count (X-cod. + D-cod.)	4+1
Power consumption (W)      Idle | full load (w/o PoE)     Idle | full load (w PoE)	1,5 | 2,9     41,5 | 43,0
Input current (A)      Idle | full load (w/o PoE)     Idle | full load (w PoE)	0,06 | 0,12 1,73 | 1,80
Inrush current (A)	tbd




Mechanical properties


Housing material:
Nickel-plated aluminium, stainless steel

Mounting:
M6 hole for wall mounting, round head screw

IP Protection class (operation):
IP65/67



Port count (M12)	4+1
Width (mm)	65
Height (mm)	135
Depth (mm)	29,8
Weight (g)	370




EMC and environmental specifications


Operating temperature:
-40°C to 70°C

Storage temperature:
-40°C to 85°C

Relative humidity (operation):
0%-95% (not condensing)

Relative humidity (storage):
0%-95% (not condensing)

Atmospheric pressure (operation):
2,000 m (795 hPa)

EMC immunity:
DIN EN - 50121-3-2, 61000-6-2

EMC radiated emission:
DIN EN - 50121-3-2, 61000-6-4

Mechanical stability:
DIN EN 61373

Fire protection:
DIN EN 45545



Approvals and certifications


CE, DIN EN 50155, DIN EN 60950-1



Status and diagnostic indicators


LED:
Power | Link/Activity pro Port | PoE pro Port

ORDERING INFORMATION

Available Modules
Article	Art.-No.	Specification
SPARK-XS41Q-31010	431410210	4+1,M12,PoE,24 V