Advantech DMU-5010
12-ch DI/O, 4-ch AI, 4-ch RTD Modbus TCP Module
- Ethernet-based I/O
- Mixed I/O in single module
- Active I/O message by data stream
- Industrial Modbus/TCP protocol
- Easily update firmware through Ethernet
- Support burn-out detection
- Support Ethernet Daisy Chain
- Wide operating temperature range
- High anti-interference performance
DMU-5010 is an Ethernet I/O module that supports Modbus TCP protocol and Ethernet daisy chain. DMU-5010 delivers various onboard I/Os including analog input, digital input, and digital output, providing flexible options to satisfy versatile application requirements. With high anti-interference performance, DMU-5010 is suitable for harsh environment applications. You can easily configure the module by the Advantech Domain Focused Configuration Tool.
Specifications
General
Enclosure
SECC
Mounting
DIN-rail,Wallmount
Dimensions (WxHxD)
43 x 125 x 105 mm (1.69" x 4.92" x 4.13")
LAN
10/100Base-T
Connector
1x40 Plug-in screw terminal block (#14~22 AWG)(Power and I/O)
2 x RJ-45(LAN)
Watchdog
System (1.6 second) and Communication (programmable)
Supported Protocols
Modbus/TCP
Power Input
Unregulated10-30V DC w/power reversal protection
Power Consumption
7.2W@ 24V DC
Analog Input
Channels
8
Input Type
mV, V, mA(Ch0-Ch3), mV, V, mA, RTD (Ch4-Ch7)
Input Range
0~5V,0~10V, 0~15V, ±5V, ±10V, ±15V, ±20mA, 0~20mA, 4~20mA
RTD Types & Temp Range
Pt 100 (2-wire and 3-wire):
-50 ~150°C
0 ~ 100°C
0 ~ 200°C
0 ~ 400°C
-200 ~ 200°C
IEC RTD 100 ohms ( =0.0385 )
JIS RTD 100 ohms ( =0.0392 )
Pt-1000(2-wire and 3-wire): -40°C ~160°C
Input Impedance
Voltage: >10MΩ;
Current:120Ω
Accuracy
±0.1%, (voltage); ±0.2% (current); ±0.2°C (RTD) or better
Span Drift
±68 ppm/°C (Voltage)
Zero Drift
±6 μV/°C (Voltage)
Resolution
16-bit
Sampling Rate
10 samples/second
Burn-out Detection
4~20mA and RTD
Protection
50/60 Hz Noise rejection
2,500 V DC Isolation
±30V DC Overvoltage
Digital Input /Output
Channels:
8-ch DI
4-ch DI/DO shared (DIO0~DIO3 can be set as DI/DO by Utillity)
Digital Input
Input Level
Dry contact:
Supports 200Hz Frequency/counter input
2 channels max
Counter (32 bit) 200Hz
Frequency 0.1Hz~200Hz
Supports Digital Noise filter
Isolation Protection
2500 V DC
Digital Output
Output
Open Collector to 30V 30mA max load.
Power Dissipation
300mW for each channel
PWM Period
2ms~3600sec
PWM Minimum Duty On
0.2ms
Isolation Protection
2500 V DC
Environment
Storage Humidity
5-95% RH
Operation Temperature
-20 ~ 70°C (-4 ~ 158°F)
Storage Temperature
-30 ~ 80°C (-22 ~ 176°F)
Ordering Information
DMU-5010-AE
General
Enclosure
SECC
Mounting
DIN-rail,Wallmount
Dimensions (WxHxD)
43 x 125 x 105 mm (1.69" x 4.92" x 4.13")
LAN
10/100Base-T
Connector
1x40 Plug-in screw terminal block (#14~22 AWG)(Power and I/O)
2 x RJ-45(LAN)
Watchdog
System (1.6 second) and Communication (programmable)
Supported Protocols
Modbus/TCP
Power Input
Unregulated10-30V DC w/power reversal protection
Power Consumption
7.2W@ 24V DC
Analog Input
Channels
8
Input Type
mV, V, mA(Ch0-Ch3), mV, V, mA, RTD (Ch4-Ch7)
Input Range
0~5V,0~10V, 0~15V, ±5V, ±10V, ±15V, ±20mA, 0~20mA, 4~20mA
RTD Types & Temp Range
Pt 100 (2-wire and 3-wire):
-50 ~150°C
0 ~ 100°C
0 ~ 200°C
0 ~ 400°C
-200 ~ 200°C
IEC RTD 100 ohms ( =0.0385 )
JIS RTD 100 ohms ( =0.0392 )
Pt-1000(2-wire and 3-wire): -40°C ~160°C
Input Impedance
Voltage: >10MΩ;
Current:120Ω
Accuracy
±0.1%, (voltage); ±0.2% (current); ±0.2°C (RTD) or better
Span Drift
±68 ppm/°C (Voltage)
Zero Drift
±6 μV/°C (Voltage)
Resolution
16-bit
Sampling Rate
10 samples/second
Burn-out Detection
4~20mA and RTD
Protection
50/60 Hz Noise rejection
2,500 V DC Isolation
±30V DC Overvoltage
Digital Input /Output
Channels:
8-ch DI
4-ch DI/DO shared (DIO0~DIO3 can be set as DI/DO by Utillity)
Digital Input
Input Level
Dry contact:
- Logic level 0 (Off): open
Logic level 1 (On): close to GND
- Logic level 0 (Off): +10V to +30V
Logic level 1(On): +3V max
Supports 200Hz Frequency/counter input
2 channels max
Counter (32 bit) 200Hz
Frequency 0.1Hz~200Hz
Supports Digital Noise filter
Isolation Protection
2500 V DC
Digital Output
Output
Open Collector to 30V 30mA max load.
Power Dissipation
300mW for each channel
PWM Period
2ms~3600sec
PWM Minimum Duty On
0.2ms
Isolation Protection
2500 V DC
Environment
Storage Humidity
5-95% RH
Operation Temperature
-20 ~ 70°C (-4 ~ 158°F)
Storage Temperature
-30 ~ 80°C (-22 ~ 176°F)
Ordering Information
DMU-5010-AE
- 8-ch DI. 4-ch DO, 8-ch AI, 4-ch RTD Modbus TCP Module
Kunder som tittade på denna vara tittade också på