MOXA EOM-104
4-port embedded managed Ethernet switch module
- 10/100 Mbps Ethernet Interface
- Turbo Ring, RSTP/STP for Ethernet Redundancy
- SNMP and e-mail alerts for event trapping and notification
- Two-thirds the size of a business card
- Low power consumption
- -40 to 75°C operating temperature range
The EOM-104 Ethernet switch module is designed for device manufacturers who would like to embed an Ethernet switch module in their products to enhance performance and reliability. The EOM-104 module provides an easy and cost-effective integrated solution for adding an Ethernet switch module to an existing product. The module supports 10/100 Mbps Fast Ethernet, and comes with Turbo Ring’s fast recovery time of under 20 ms built in. The EOM-104 also provides a rich set of peripherals, such as Turbo Ring Enable and GPIO programming pins, and is an ideal solution for embedded Ethernet applications.
Technology
Standards
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X) and 100BaseFX
IEEE 802.3x for flow control
IEEE 802.1D for Spanning Tree Protocol
IEEE 802.1w for Rapid STP
IEEE 802.1p for Class of service
Protocols
SNMPv1/v2c/v3, DHCP Client, BootP, TFTP, SMTP, RARP, RMON, HTTP, Telnet, Syslog
MIB
MIB-II, Ethernet-Like MIB, P-Bridge MIB, Bridge MIB, RSTP MIB, RMON MIB Group 1, 2, 3, 9
Flow Control
IEEE 802.3x flow control
Switch Properties
MAC Table Size
1 K
Packet Buffer Size
512 kbit
Interface
Ethernet Ports
EOM-104: 4 10/100BaseT(X) ports
EOM-104-FO: 2 10/100BaseT(X) and 2 100BaseFX ports
Connectors
1 connector with 2 x 20 pins, 2 connectors with 1 x 9 pins, and 1 connector with 2 x 2 pins
Console Port
RS-232 (TxD, RxD, DTR, DSR)
Power Requirements
Input Voltage
3.3 V
Input Current
EOM-104: 0.59 A @ 3.3 V
EOM-104-FO: 1.22 A @ 3.3 V
Physical Characteristics
Dimensions
54 x 60 x 8.25 mm (2.13 x 2.36 x 0.32 in)
Weight
21 g
Environmental Limits
Operating Temperature
-40 to 75°C (-40 to 167°F)
Storage Temperature
-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity
5 to 95% (non-condensing)
Standards and Certifications
EMI
FCC Part 15 Subpart B Class A, EN 55022 Class A, CE Class A
Standards
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X) and 100BaseFX
IEEE 802.3x for flow control
IEEE 802.1D for Spanning Tree Protocol
IEEE 802.1w for Rapid STP
IEEE 802.1p for Class of service
Protocols
SNMPv1/v2c/v3, DHCP Client, BootP, TFTP, SMTP, RARP, RMON, HTTP, Telnet, Syslog
MIB
MIB-II, Ethernet-Like MIB, P-Bridge MIB, Bridge MIB, RSTP MIB, RMON MIB Group 1, 2, 3, 9
Flow Control
IEEE 802.3x flow control
Switch Properties
MAC Table Size
1 K
Packet Buffer Size
512 kbit
Interface
Ethernet Ports
EOM-104: 4 10/100BaseT(X) ports
EOM-104-FO: 2 10/100BaseT(X) and 2 100BaseFX ports
Connectors
1 connector with 2 x 20 pins, 2 connectors with 1 x 9 pins, and 1 connector with 2 x 2 pins
Console Port
RS-232 (TxD, RxD, DTR, DSR)
Power Requirements
Input Voltage
3.3 V
Input Current
EOM-104: 0.59 A @ 3.3 V
EOM-104-FO: 1.22 A @ 3.3 V
Physical Characteristics
Dimensions
54 x 60 x 8.25 mm (2.13 x 2.36 x 0.32 in)
Weight
21 g
Environmental Limits
Operating Temperature
-40 to 75°C (-40 to 167°F)
Storage Temperature
-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity
5 to 95% (non-condensing)
Standards and Certifications
EMI
FCC Part 15 Subpart B Class A, EN 55022 Class A, CE Class A
Available Modules | EOM-104: | 4-port embedded managed Ethernet switch module, -40 to 75°C operating temperature | EOM-104 Evaluation Kit | Includes an EOM-104 switch module and evaluation board with 4 10/100BaseT(X) ports for testing and application development | EOM-104-FO | Embedded managed Ethernet switch module with 2 10/100BaseT(X) and 2 100BaseFX ports, -40 to 75°C operating temperature | EOM-104-FO Evaluation Kit | Includes an EOM-104-FO switch module and evaluation board with 2 10/100BaseT(X) ports and 2 100BaseFX multi-mode ports (SC connectors) for testing and application development |
Kunder som tittade på denna vara tittade också på