MOXA ioLogik E2260
Active Ethernet I/O with 6 RTD Inputs, and 4 Digital Outputs
- Supports 6 different sensor inputs, including PT, JPT, Ni RTD sensors, and resistor up to 2,200 Ohm
- 6 virtual inputs for Average and Deviation modes
- 4 digital outputs with pulse output
- Adjustable RTD sampling rate up to 12 samples/sec
- Instant event reporting by TCP/UDP/e-mail/SNMP trap with time stamp
- Built-in web console for remote access and configuration
- Easy local control without programming by patented Click&Go logic
- 100 Mbps Ethernet with Modbus/TCP protocol
- Optional LCM kit
Link RTD Sensors and Digital Outputs to Ethernet Networks
The MOXA ioLogik E2260 is designed for system integrators to acquire and control remote RTD sensors over TCP/IP and Ethernet networks. Types of RTD sensors include PT, JPT, Ni types, and resistor. The ioLogik E2260 supports Ethernet and can run multiple protocols, such as Modbus/TCP, SNMP, HTTP, TCP, and UDP at 100 Mbps for high speed data acquisition. Data can be distributed to up to 10 host computers.
Independent Configurations for Multiple RTD Channels
Each fixed physical RTD input can be independently configured by software to PT, JPT, Ni, and resistor modes. In addition, a special virtual channel can be configured by software to Average or Deviation mode to calculate its fixed RTD channel.
The MOXA ioLogik E2260 is designed for system integrators to acquire and control remote RTD sensors over TCP/IP and Ethernet networks. Types of RTD sensors include PT, JPT, Ni types, and resistor. The ioLogik E2260 supports Ethernet and can run multiple protocols, such as Modbus/TCP, SNMP, HTTP, TCP, and UDP at 100 Mbps for high speed data acquisition. Data can be distributed to up to 10 host computers.
Independent Configurations for Multiple RTD Channels
Each fixed physical RTD input can be independently configured by software to PT, JPT, Ni, and resistor modes. In addition, a special virtual channel can be configured by software to Average or Deviation mode to calculate its fixed RTD channel.
ioLogik E2260 Specifications
Inputs and Outputs
RTD Inputs
6 channels
Digital Outputs
4 channels
Isolation
3k VDC or 2k Vrms
RTD Inputs
Input Type
PT50, PT100, PT200, PT500, PT1000; JPT100, JPT200, JPT500, JPT1000; NI100, NI120, NI200, NI500, NI1000;
Resistance of 310, 620, 1250, and 2200 ohms
Input connection
2 or 3 wire
Sampling Rate
12 samples/sec (all channels)
Resolution
0.1°C or 0.1 ohm
Accuracy
±0.1% FSR @ 25°C
±0.3% FSR @ -10 and 60°C
±0.5% FSR @ -40 and 75°C
Input Impedance
625k ohms
Digital Output
Type
Sink
I/O Mode
DO or Pulse Output
Pulse Output Frequency
100 Hz
Over-voltage Protection
45 VDC
Over-current Protection
2.6 A (4 channels @ 650 mA)
Over-temperature Shutdown
175°C
Current Rating
200 mA per channel
Power Requirements
Power Consumption
95 mA @ 24 VDC
MTBF (mean time between failures)
Time
327,282 hrs
Database
Telcordia (Bellcore)
Common Specifications
LAN
Ethernet
1 10/100 Mbps RJ45 port
Protection
1.5 kV magnetic isolation
Protocols
Modbus/TCP, TCP/IP, UDP, DHCP, BOOTP, SNMP, HTTP, CGI, SNTP, SMTP
Serial Communication
Interface
RS-485-2w: Data+, Data-, GND (3-contact terminal block)
Serial Line Protection
15 kV ESD for all signals
Serial Communication Parameters
Parity
None
Data Bits
8
Stop Bits
1
Flow Control
None
Baudrate
1200 to 115200 bps
Protocol
Modbus/RTU
Power Requirements
Power Input
24 VDC nominal, 12 to 36 VDC
Physical Characteristics
Wiring
I/O cable max. 14 AWG
Dimensions
115 x 79 x 45.6 mm (4.53 x 3.11 x 1.80 in)
Weight
under 250 g
Mounting
DIN rail or wall
Environmental Limits
Operating Temperature
Standard Models: -10 to 60°C (14 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature
-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity
5 to 95% (non-condensing)
Altitude
Up to 2000 m
Note Please contact us if you require products guaranteed to function properly at higher altitudes.
Standards and Certifications
Safety
UL 508
EMI
EN 61000-3-2; EN 61000-3-3; EN 61000-6-4;
FCC
Part 15, Subpart B, Class A
EMS
EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5,
EN 61000-4-6, EN 61000-4-8, EN 61000-4-11, EN 61000-6-2
Shock
IEC 60068-2-27
Freefall
IEC 60068-2-32
Vibration
IEC 60068-2-6
Green Product
RoHS, CRoHS, WEEE
Ordering Information
Available Modules | |
ioLogik E2260 | Ethernet Micro RTU Controller with 6 RTD inputs and 4 digital outputs |
ioLogik E2260-T | Ethernet Micro RTU Controller with 6 RTD inputs and 4 digital outputs, -40 to 85°C operating temperature |
Kunder som tittade på denna vara tittade också på