Advantech ADAM-6542
Product is End of Life : 2020-10-27
Ethernet to WDM Single Strand Fiber Optic Converter
- Supports 1-port 100 Mbps single strand fi ber optics
- Supports 10 ~30 VDC power input
- Easily to mounted on a DIN-rail, panel or piggyback
- Provides 100Base-FX WDM single strand fi ber
- Supports MDI/MDIX auto crossover.
- Embedded with a switch controller, supports auto-negotiation.
- Embedded with the memory buffer, supports store and forward transmission.
The Advantech ADAM-6542 adopts WDM technology that increases the information carrying capacity of fiber via multiplex transmit and receive signals at different wavelengths on the single strand cable. The WDM technology is implemented in couples. One site is installed ADAM-6542/W15 which transmit channel is 1550nm and receive channel is 1310nm. The other site is installed ADAM6542/W13 which transmit channel is 1310nm and receive channel is 1550nm. Both transmit and receive channels of ADAM-6542/W15 and ADAM-6542/W13 are multiplexed to a single strand cable. You can save half cabling cost when you use ADAM-6542/W15 and ADAM-6542/W13 instead of your original dual fiber converter.
Communications
Standard
IEEE 802.3, 802.3u, 802.3x
LAN
10/100Base-TX, 100Base-FX
Transmission Distance
Ethernet : Up to 100 m
Fiber: Up to 20 km
Transmission Speed
Up to 100 Mbps
Interface
Connectors
1 x RJ-45
1 x SC type fiber connector
2-pin removable screw terminal (power)
LED Indicators
Power, Link (100Base-FX), 100/10 M (Ethernet)
Power
Power Consumption
Max. 3 W
Power Input
1 x Unregulated 10 ~ 30 V DC
Mechanism
Dimensions (W x H x D)
70 x 112 x 27 mm
Enclosure
IP30, ABS+PC with solid mounting kits
Mounting
DIN 35 rail, Wall, Stack
Protection
ESD (Ethernet)
4,000 V DC
Isolation (Ethernet)
1,500 V rms
Surge (EFT for power)
3,000 V DC
Environment
Operating Temperature
0 ~ 60° C (32 ~ 140° F)
Stack : 0 ~ 55° C (32 ~ 131° F)
Storage Temperature
-10 ~ 70° C (-14 ~ 158° F)
Operating Humidity
20 ~ 95% (non-condensing)
Storage Humidity
0 ~ 95% (non-condensing)
MTBF
550,000 hrs
Certifications
Safety
UL 60950-1, CAN/CSA-C22.2 No.60950
EMC
U.S.A.: FCC Part 15 CISPR 22
EU: EN55011, EN61000-6-4 EN55022 Class A, EN61000-3-2/3 EN55024 IEC61000-4-2/3/4/5/6/8/11 EN61000-6-2
Ordering Information
ADAM-6542/W15
ADAM-6542/W13
Standard
IEEE 802.3, 802.3u, 802.3x
LAN
10/100Base-TX, 100Base-FX
Transmission Distance
Ethernet : Up to 100 m
Fiber: Up to 20 km
Transmission Speed
Up to 100 Mbps
Interface
Connectors
1 x RJ-45
1 x SC type fiber connector
2-pin removable screw terminal (power)
LED Indicators
Power, Link (100Base-FX), 100/10 M (Ethernet)
Power
Power Consumption
Max. 3 W
Power Input
1 x Unregulated 10 ~ 30 V DC
Mechanism
Dimensions (W x H x D)
70 x 112 x 27 mm
Enclosure
IP30, ABS+PC with solid mounting kits
Mounting
DIN 35 rail, Wall, Stack
Protection
ESD (Ethernet)
4,000 V DC
Isolation (Ethernet)
1,500 V rms
Surge (EFT for power)
3,000 V DC
Environment
Operating Temperature
0 ~ 60° C (32 ~ 140° F)
Stack : 0 ~ 55° C (32 ~ 131° F)
Storage Temperature
-10 ~ 70° C (-14 ~ 158° F)
Operating Humidity
20 ~ 95% (non-condensing)
Storage Humidity
0 ~ 95% (non-condensing)
MTBF
550,000 hrs
Certifications
Safety
UL 60950-1, CAN/CSA-C22.2 No.60950
EMC
U.S.A.: FCC Part 15 CISPR 22
EU: EN55011, EN61000-6-4 EN55022 Class A, EN61000-3-2/3 EN55024 IEC61000-4-2/3/4/5/6/8/11 EN61000-6-2
Ordering Information
ADAM-6542/W15
- Ethernet to WDM Single Strand Fiber Optic Converter (Tx : 1550 nm, Rx : 1310 nm)
ADAM-6542/W13
- Ethernet to WDM Single Strand Fiber Optic Converter (Tx : 1310 nm, Rx : 1550 nm
Kunder som tittade på denna vara tittade också på