Digi ConnectPort X2
Industrial-Grade Programmable XBee® to IP Gateways
- Ethernet gateways supporting XBee ZigBee and other XBee RF modules
- Easy development Python scripting
- Multiple form factors and configuration options
- Secure, anywhere management using Device Cloud
- XBee to Ethernet IP gateways support numerous XBee protocols
- Industrial grade enclosures for rugged environments
- Device Cloud for secure, scalable access to an unlimited number of remote assets and seamless web services integration from Digi gateways into customer back office applications
ConnectPort X2 is a small XBee to Ethernet gateway that provides low-cost IP networking of XBee-enabled devices and sensor networks. Featuring a simple development environment, ConnectPort X2 enables custom applications to run locally while interfacing across existing Ethernet networks for WAN connectivity to a centralized server.
ConnectPort X2 gateways benefit from the enhanced management capabilities offered by Digi Device Cloud. This web-based device management system enables remote access and control of your Digi gateways.
ConnectPort X2 products feature rapid M2M-specific application development on the industry standard Python scripting engine. Digi ESP™ provides an IDE featuring device detection, debugging, compiling and downloading of Python code to Digi gateways.
General
- Management
HTTP/HTTPS web interface, Password access control, IP service port control, Optional secure enterprise management via Device Cloud
Protocols
UDP/TCP, DHCP, SNMPv1
Total Memory
8 MB Flash, 16 MB RAM
LEDs
Ethernet status, Power, ZigBee link/activity
Security
SSL tunnels
Dimensions (L x W x H)
5.50 in x 2.75 in x 1.13 in (13.9 cm x 7.0 cm x 2.9 cm);
0.44 lb (0.20 kg)
Wireless Interfaces
- XBee Module Options
802.15.4, ZigBee, DigiMesh 2.4, 900HP, XSC, 868
Antenna Port
RPSMA female
Ethernet
- Ports
ZigBee, 802.15.4, DigiMesh (XBee-PRO 900HP)
Physical Layer
10/100Base-T
Data Rate and Mode
10/100 Mbps (auto-sensing); Full or half duplex (auto-sensing)
Power Requirements
- Power Input
9-30 VDC
Power Supply
12 VDC power supply for 0° C to 60° C (32° F to 140° F) with locking barrel connector included;
Extended temperature power supply available separately
Power Consumption
Idle: 1.2 W, Max: 3.4 W
Surge Protection (w/included power supply)
4 kV burst (EFT) per-4-4, 2 kV surge per EN61000-4
Environmental
- Operating Temperature
-30° C to +70° C (-22° F to +158° F)
Relative Humidity
5% to 95% (non-condensing)
Ethernet Isolation
1500 VAC min per IEEE802.3/ANSI X3.263
Regulatory Approvals
- Safety
EN60950
Emissions/Immunity
CE, FCC Part 15 (Class A)
ORDERING INFORMATION
X2 - ZIGBEE | PART NUMBER |
ConnectPort X2 - XBee (ZigBee) to Ethernet. Commercial enclosure. Antennas and power supply included. | X2-Z11-EC-A |
ConnectPort X2 - XBee (ZigBee) to Ethernet. Commercial enclosure. Antennas and power supply included. (International) | X2-Z11-EC-W |
X2 - 802.15.4 | PART NUMBER |
ConnectPort X2 – XBee (802.15.4) to Ethernet. Industrial enclosure. Antennas and power supply included. | X2-A11-EM-A |
ConnectPort X2 – XBee (802.15.4) to Ethernet. Industrial enclosure. Antennas and power supply included. (International) | X2-A11-EM-W |
X2 - XBEE-PRO 900HP | PART NUMBER |
ConnectPort X2 – XBee-PRO 900HP to Ethernet. Industrial enclosure. Antennas and power supply included, for Australia (International) | X2-HMA-EM-W |
ConnectPort X2 - XBee-PRO 900HP to Ethernet. Industrial enclosure. Antennas and power supply included. | X2-HMU-EM-A |
X2 - DIGIMESH 900 MHZ (NOT COMPATIBLE WITH XBEE-PRO 900HP) | PART NUMBER |
ConnectPort X2 - XBee (DigiMesh 900 MHz) to Ethernet. Industrial enclosure. Antennas and power supply included. | X2-M91-EM-A |
X2 - DIGIMESH 2.4 GHZ | PART NUMBER |
ConnectPort X2 - XBee (DigiMesh 2.4 GHz) to Ethernet. Industrial enclosure. Antennas and power supply included. (International) | X2-M11-EM-W |
ConnectPort X2 - XBee (DigiMesh 2.4 GHz) to Ethernet. Industrial enclosure. Antennas and power supply included. | X2-M11-EM-A |
X2 - XTEND | PART NUMBER |
ConnectPort X2 - XTend to Ethernet. Industrial enclosure. Antennas and power supply included. | X2-T11-EM-A |
XBEE-PRO XSC (9XSTREAM COMPATIBLE) | PART NUMBER |
ConnectPort X2 - XBee-PRO XSC to Ethernet. Industrial enclosure. Antennas and power supply included. | X2-S11-EM-A |
X2 - 868 MHZ | PART NUMBER |
ConnectPort X2 - XBee (868 MHz) to Ethernet. Industrial enclosure. Antennas and power supply included. (International) | X2-P81-EM-W |
Kunder som tittade på denna vara tittade också på