S-CONNECT - MOXA EDS-P506A-4PoE Series

MOXA EDS-P506A-4PoE Series

Product is End of Life : 2019-12-02
6-port IEEE 802.3af/at PoE+ managed Ethernet switches

Egenskaper
Beskrivning
Further Information
PDF

4 IEEE 802.3af/at compliant PoE and Ethernet combo ports
Up to 30 watts per PoE port
24/48 VDC wide range redundant power inputs
Advanced PoE management functions, including PD failure check and PoE scheduling
-40 to 75°C operation temperature range (T models)
Advanced PoE management function (PoE port setting, PD failure check, and PoE scheduling)
24/48 VDC wide range redundant power inputs
IPv6 Ready logo awarded (IPv6 Logo Committee certified)
IEEE 1588 PTP (Precision Time Protocol) for precise time synchronization of networks
DHCP Option 82 for IP address assignment with different policies
Modbus/TCP industrial Ethernet protocol supported
Turbo Ring and Turbo Chain (recovery time < 20 ms at full load), and RSTP/STP (IEEE 802.1w/D)
IGMP snooping and GMRP for filtering multicast traffic
Port-based VLAN, IEEE 802.1Q VLAN, and GVRP to ease network
QoS (IEEE 802.1p/1Q) and TOS/DiffServ to increase determinism
Port Trunking for optimum bandwidth utilization
SNMPv3, IEEE 802.1X, HTTPS, and SSH to enhance network security
Lock port function for blocking unauthorized access based on MAC address
SNMPv1/v2c/v3 for different levels of network management
RMON for efficient network monitoring and proactive capability
Bandwidth management to prevent unpredictable network status
Port mirroring for online debugging
Automatic warning by exception through e-mail, relay output

The EDS-P506A-4PoE series managed redundant Ethernet switches come standard with 4 10/100BaseT(X) 802.3at (PoE+) and 802.3af (PoE) compliant Ethernet ports and 2 10/100Base(TX) or 2 10/100BaseFX Ethernet ports. The EDS-P506A-4PoE switches provide up to 30 watts of power per PoE port, and allow power to be supplied to connected high-power devices (such as high-end PTZ camera and WiMAX devices) when AC power is not readily available or is costprohibitive to provide locally. The EDS-P506A-4PoE series switches are highly versatile, and their fiber port can transmit data up to 80 km from the device to the control center with high EMI immunity. The Ethernet switches support advanced management and security features. The EDS-P506A-4PoE series series is designed especially for security automation applications such as IP surveillance, and gate of entry systems, which can benefit from a scalable backbone construction and Power-over-Ethernet support.

Technology

Standards
IEEE 802.3af/at for Power-over-Ethernet
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X) and 100BaseFX
IEEE 802.3x for Flow Control
IEEE 802.1D-2004 for Spanning Tree Protocol
IEEE 802.1w for Rapid STP
IEEE 802.1s for Multiple Spanning Tree Protocol
IEEE 802.1Q for VLAN Tagging
IEEE 802.1p for Class of Service
IEEE 802.1X for Authentication
IEEE 802.3ad for Port Trunk with LACP

Protocols
IGMPv1/v2, GMRP, GVRP, SNMPv1/v2c/v3, DHCP Server/Client, DHCP Option 66/67/82, BootP, TFTP, SNTP, SMTP, RARP, RMON, HTTP, HTTPS, Telnet, SSH, Syslog, EtherNet/IP, Modbus/TCP, SNMP Inform, LLDP, IEEE 1588 PTPv2, IPv6, NTP Server/Client

MIB
MIB-II, Ethernet-Like MIB, P-BRIDGE MIB, Q-BRIDGE MIB, Bridge MIB, RSTP MIB, RMON MIB Group 1, 2, 3, 9

Flow Control
IEEE 802.3x flow control, back pressure flow control

Switch Properties

Priority Queues
4

Max. Number of Available VLANs
64

VLAN ID Range
VID 1 to 4094

IGMP Groups
256

MAC Table Size
8 K

Packet Buffer Size
1 Mbit

Interface

Fiber Ports
100BaseFX ports (SC/ST connector)

RJ45 Ports
10/100BaseT(X) auto negotiation speed, Full/Half duplex mode, and auto MDI/MDI-X connection

PoE Pinout
V+, V+, V-, V- for pin 1, 2, 3, 6 (Endspan, MDI Alternative A)

Console Port RS-232 (RJ45 connector)

DIP Switches
Turbo Ring, Master, Coupler, Reserve

LED Indicators
PWR1, PWR2, FAULT, 10/100M, MSTR/HEAD, CPLR/TAIL, PoE

Alarm Contact
2 relay outputs with current carrying capacity of 1 A @ 24 VDC

Digital Inputs
2 inputs with the same ground, but electrically isolated from the electronics.

+13 to +30V for state “1”
-30 to +3V for state “0”
Max. input current: 8 mA

Optical Fiber

	100BaseFX
	Multi-mode	Single-mode
Wavelength	1300 nm	1310 nm
Max. TX	-10 dBm	0 dBm
Min. TX	-20 sBm	-5 dBm
RX Sensitivity	-32 dBm	-34 dBm
Link Budget	12 dB	29 dB
Typical Distance	5 km (a) 4 km (b)	40 km (c)
Saturation	-6 dBm	-3 dBm

Power Requirements

Input Voltage
24/48 (20 to 60 V) VDC, redundant dual inputs

Input Current
Max. 7.8 A @ 24 VDC (supports up to 4 ports at 30 watts per PoE port)

Connection
2 removable 6-contact terminal blocks

Reverse Polarity Protection
Present

Physical Characteristics

Housing
Metal, IP30 protection

Dimensions
80 x 135 x 131.5 mm (3.15 x 5.31 x 5.18 in)

Weight
1270 g

Installation
DIN-rail mounting, wall mounting (with optional kit)

Environmental Limits

Operating Temperature
Standard Models: 0 to 60°C (32 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)

Storage Temperature
-40 to 85°C (-40 to 185°F)

Ambient Relative Humidity
5 to 95% (non-condensing)

Standards and Certifications

Safety
UL 508

EMI
FCC Part 15 Subpart B Class A, EN 55022 Class A

EMS
EN 61000-4-2 (ESD) Level 3, EN 61000-4-3 (RS) Level 3, EN 61000-4-4 (EFT) Level 3,
EN 61000-4-5 (Surge) Level 3, EN 61000-4-6 (CS) Level 3, EN 61000-4-8

Rail Traffic
EN 50121-4

Shock
IEC 60068-2-27

Freefall
IEC 60068-2-32

Vibration
IEC 60068-2-6

MTBF (mean time between failures)

Time
433,000 hrs

Database
Telcordia (Bellcore), GB

Ordering Informaion

EDS-P506A-4PoE	PoE+ managed Ethernet switch with 4 PoE+ 10/100BaseT(X) ports and 2 10/100BaseT(X) ports, 0 to 60°C operating temperature
EDS-P506A-4PoE-MM-SC	PoE+ managed Ethernet switch with 4 PoE+ 10/100BaseT(X) ports, and 2 100BaseFX multi-mode ports with SC connector, 0 to 60°C operating temperature
EDS-P506A-4PoE-MM-SC-T	PoE+ managed Ethernet switch with 4 PoE+ 10/100BaseT(X) ports, and 2 100BaseFX multi-mode ports with SC connector, -40 to 75°C operating temperature
EDS-P506A-4PoE-MM-ST	PoE+ managed Ethernet switch with 4 PoE+ 10/100BaseT(X) ports, and 2 100BaseFX multi-mode ports with ST connector, 0 to 60°C operating temperature
EDS-P506A-4PoE-MM-ST-T	PoE+ managed Ethernet switch with 4 PoE+ 10/100BaseT(X) ports, and 2 100BaseFX multi-mode ports with ST connector, -40 to 75°C operating temperature
EDS-P506A-4PoE-SS-SC	PoE+ managed Ethernet switch with 4 PoE+ 10/100BaseT(X) ports, and 2 100BaseFX single-mode ports with SC connector, 0 to 60°C operating temperature
EDS-P506A-4PoE-SS-SC-T	PoE+ managed Ethernet switch with 4 PoE+ 10/100BaseT(X) ports, and 2 100BaseFX single-mode ports with SC connector, -40 to 75°C operating temperature
EDS-P506A-4PoE-T	PoE+ managed Ethernet switch with 4 PoE+ 10/100BaseT(X) ports and 2 10/100BaseT(X) ports, -40 to 75°C operating temperature

Moxa EDS-P506A-4PoE Series Datasheet (523.4 kB)

Kunder som tittade på denna vara tittade också på